# Run SBP Node on Ubuntu 16.04

This document explains how to set up an SBP node. All steps have been tested on ubuntu 16.04.

# Install gvite

# Install from a Binary Package

Latest installation package can be found at gvite Releases (opens new window).

Copy ## Download curl -L -O https://github.com/vitelabs/go-vite/releases/download/${version}/gvite-${version}-linux.tar.gz Copy ## Unpack package tar -xzvf gvite-${version}-linux.tar.gz Copy ## Enter the folder. You should see 3 files: gvite, bootstrap and node_config.json mv gvite-${version}-linux vite cd vite Copy ## Config node_config.json and then save vi node_config.json Copy ## Boot up gvite node ./bootstrap

# Check if gvite is Started

Check the content of gvite.log in the same folder to determine whether the program is up and running.

Copy cat gvite.log

The following messages indicate that boot is successful.

Copy t=2018-11-09T17:44:48+0800 lvl=info msg=NodeServer.DataDir:/home/ubuntu/.gvite/maindata module=gvite/node_manager t=2018-11-09T17:44:48+0800 lvl=info msg=NodeServer.KeyStoreDir:/home/ubuntu/.gvite/maindata/wallet module=gvite/node_manager Prepare the Node success!!! Start the Node success!!!

# Obtain the Path of Installation Directory

Copy pwd

Please write down the path, which will be used later

For example, if you logged in as root user, the installation directory is:

Copy /root/vite

# Create Wallet

# Create a New Wallet

Execute the following command

Copy ./gvite rpc ~/.gvite/maindata/gvite.ipc wallet_newMnemonicAndEntropyStore '["123456"]'

Here 123456 is keystore's password, you should replace it with your own password.

Copy { "jsonrpc": "2.0", "id": 1, "result": { "mnemonic": "ancient rat fish intact viable flower now rebuild monkey add moral injury banana crash rabbit awful boat broom sphere welcome action exhibit job flavor", "primaryAddr": "vite_f1c2d944b1e5b8cbfcd5f90f94a0e877beafeced1f331d9acf", "filename": "~/.gvite/maindata/wallet/vite_f1c2d944b1e5b8cbfcd5f90f94a0e877beafeced1f331d9acf" } }
  • mnemonic: Mnemonic phrase. Please keep it safe
  • primaryAddr: Vite address at index 0 corresponding to the mnemonic
  • filename: The location of the keyStore file

Run exit to abort

# Check if the Wallet has been Created Successfully

Execute the following command

Copy ls ~/.gvite/maindata/wallet/

The following result should be displayed

Copy vite_f1c2d944b1e5b8cbfcd5f90f94a0e877beafeced1f331d9acf

vite_f1c2d944b1e5b8cbfcd5f90f94a0e877beafeced1f331d9acf is the wallet address created above. Multiple addresses will be displayed if more than one keystore files were created.

# Edit node_config.json

Copy vi node_config.json

Edit following content:

Copy "Miner": true, "CoinBase": "0:${your_address}", "EntropyStorePath": "${your_address}", "EntropyStorePassword": "${your_password}",
  • ${your_address}: Your wallet address created above. This address will be used to produce snapshot blocks
  • ${your_password}: Your wallet password

Save and quit

# Reboot Node

Kill existing gvite process

Copy pgrep gvite | xargs kill -9

Reboot

Copy ./bootstrap

Check if gvite is rebooted successfully

Copy ps -efww|grep -w 'gvite'

Below output indicates reboot is completed successfully:

Copy root 6560 5939 0 12:29 pts/1 00:00:00 grep --color=auto -w gvite

# Query Current Snapshot Height in Command Line

Input:

Copy ./gvite rpc ~/.gvite/maindata/gvite.ipc ledger_getSnapshotChainHeight

Output:

Copy "{\"id\":0,\"jsonrpc\":\"2.0\",\"result\":\"499967\"}"

499967 is current block height.

For more command usage please run command vite.help.

# Config gvite as Auto-start Service

# Create install.sh

Copy ## Navigate to gvite installation directory, and make sure it contains gvite and node_config.json cd vite ls Copy ## Create install.sh and copy below script content in vi install.sh Copy #!/bin/bash set -e CUR_DIR=`pwd` CONF_DIR="/etc/vite" BIN_DIR="/usr/local/vite" LOG_DIR=$HOME/.gvite echo "install config to "$CONF_DIR sudo mkdir -p $CONF_DIR sudo cp $CUR_DIR/node_config.json $CONF_DIR ls $CONF_DIR/node_config.json echo "install executable file to "$BIN_DIR sudo mkdir -p $BIN_DIR mkdir -p $LOG_DIR sudo cp $CUR_DIR/gvite $BIN_DIR echo '#!/bin/bash exec '$BIN_DIR/gvite' -pprof -config '$CONF_DIR/node_config.json' >> '$LOG_DIR/std.log' 2>&1' | sudo tee $BIN_DIR/gvited > /dev/null sudo chmod +x $BIN_DIR/gvited ls $BIN_DIR/gvite ls $BIN_DIR/gvited echo "config vite service boot." echo '[Unit] Description=GVite node service After=network.target [Service] ExecStart='$BIN_DIR/gvited' Restart=on-failure User='`whoami`' LimitCORE=infinity LimitNOFILE=10240 LimitNPROC=10240 [Install] WantedBy=multi-user.target' | sudo tee /etc/systemd/system/vite.service>/dev/null sudo systemctl daemon-reload Copy ## Grant executable permission sudo chmod +x install.sh

# Run install.sh and Enable Service

Copy ## Run install.sh ./install.sh ## Set auto-start sudo systemctl enable vite

# Start gvite service

Copy ## Kill original gvite process pgrep gvite | xargs kill -s 9 ## Check result ps -ef | grep gvite ## Start gvite service sudo service vite start ## Check result ps -ef | grep gvite ## Check service status sudo service vite status ## Check boot log tail -n200 ~/.gvite/std.log

Below message will be displayed if the service has been started up successfully:

Copy vite.service - GVite node service Loaded: loaded (/etc/systemd/system/vite.service; disabled; vendor preset: enabled) Active: active (running) since Thu 2018-11-22 21:23:30 CST; 1s ago Main PID: 15872 (gvite) Tasks: 7 Memory: 12.1M CPU: 116ms CGroup: /system.slice/vite.service └─15872 /usr/local/vite/gvite -pprof -config /etc/vite/node_config.json Nov 22 21:23:30 ubuntu systemd[1]: Started GVite node service.

# Shut down gvite Service

Copy sudo service vite stop

!!! Gvite service config is located in /etc/vite. Gvite console messages are logged in $HOME/.gvite/std.log.

# Tips

Execute below command in gvite command line console

Copy ./gvite rpc ~/.gvite/maindata/gvite.ipc ledger_getSnapshotChainHeight

The latest height will be printed out in every second. Run exit to abort.